Erfurt MAV

01427 616597
enquiries@erfurtmav.com

Ekotex Contact Adhesive

ekotex_extra_sterk


Ekotex contact adhesive has been specially developed to ensure problem free bonding of Wallrock Magnetwall to surfaces. for best results, we recommend the use of circe 150ml per M² of Wallrock Magnetwall.

Apply adhesive to the wall surface and reverse side of the Wallrock Magnetwall, 50-100ml per M² is recommended for the wall surface and 50ml per M² for the reverse of the Wallrock Magnetwall, overall 150ml per M². Once the adhesive has been applied to both surfacesit is then advised to wait 20 minutes before applying Wallrock Magnetwall to the surface (the adhesive will become translucent after 20 minutes).

Available in 3kg tubs.

For more information on our Magentic Wall System, how to create your own Magnet Wall and where to purchase, please give us a call on 01427 616597

  • High grab contact adhesive
  • Specially formulated for use with Wallrock Magnetwall
  • Easy to use

Stir well before use.

Apply adhesive to the wall surface and reverse side of the Wallrock Magnetwall, 50-100ml per M² is recommended for the wall surface and 50ml per M² for the reverse of the Wallrock Magnetwall, overall 150ml per M². Once the adhesive has been applied to both surfacesit is then advised to wait 20 minutes before applying Wallrock Magnetwall to the surface (the adhesive will become translucent after 20 minutes).

%MCEPASTEBIN%

Related products

Results 1 - 2 of 2

This is a simple wallpaper calculator and should be used as a guide only. You can find the roll width and roll length you are after on the specific product page.
Roll widths are provided in meters (such as 0.5 x 10mtr) so your wall widths and heights should be inputted in meters also.
If you are purchasing an offset match product then you may need a little extra as there may be some waste. If you have any windows or doors in your walls you can simply ignore these. This will give a good estimate of required roll numbers.

Wallpaper Calculator