Erfurt MAV

01427 616597
enquiries@erfurtmav.com

Wallrock Fibreliner Original 150

55single
55singlewallrock_fibreliner_all_rolls


Wallrock Brochure DownloadWallrock Fibreliner is a no nonsense paper, strong, durable and easy to hang it is suitable for a whole variety of problematic walls. Cracked and damaged walls can be covered quickly and easily and because of its class leading strength it will help to reinforce your wall surface. This is the paper of chioce for many professional and DIY decorators as it is quick and easy to hang.

Developed with the best modern materials and technology to enable old and tired walls to be smooth once more.

Wallrock Fibreliner 150 has a 'natural' uncoated finish.

Heavier grades are available in either the Wallrock Fibreliner Plus 180 or Wallrock Premium 200.

To view a practical hinging guide, click here

Wallrock Fibreliner 150

  • Paste the wall or the paper
  • Amazing strength and durability
  • Disguises imperfections
  • Excellent surface for paint or paper
  • Reinforces walls and ceilings
  • Tough and durable
  • Allows walls to breathe
  • Contains no pvc
  • Uses paper from well managed source
  • Fire rated B-s1,d0

single length: 10m x 55cm coverage: 5.5m² approx
double length: 20m x 55cm coverage: 11m² approx
double length: 20m x 75cm coverage: 15m² approx
double length: 20m x 100cm coverage: 20m² approx

Wallrock Fibreliner 150

Wallrock Fibreliner offers two surface finishes. The outer surface of the roll offers an improved finish for either painting or over hanging with wallpaper. We recommend that the inner surface of the roll is applied to the wall.

  1. Cut all lengths required allowing extra for trim at each end, or simply hang directly from the roll onto a prepasted wall or ceiling. Apply the inner surface to the wall. Please note Wallrock Fibreliner can also be hung horizontally, especially useful if you intend to overhang with a decorative wallpaper.
  2. Mark a guideline with a pencil for the first length, using a plumbline as a guide for vertical drops or a spirit level for horizontal application.
  3. If applying the adhesive direct to the wall or ceilings, apply enough to hang one or two lengths at a time, ensuring the paste exceeds the width of the second length. If pasting the material (either side) make sure all edges are covered. With both methods, hang Wallrock Fibreliner immediately - no soaking is required.
  4. Apply the first length along the guideline and smooth out with a wallpaper brush then trim the ends.
  5. Butt join all subsequent lengths being careful not to overlap the edges.
  6. Allow Wallrock to dry thoroughly before decorating with emulsion paint or overhanging with another wallcovering (normally 24 hours is sufficient).
  7. Wallrock Fibreliner is also ‘dry strippable’ in many applications.

 

We strongly recommend the use of a good quality ready mixed adhesive, such as our Wallrock Power Adhesive, for application of this product.

This is a simple wallpaper calculator and should be used as a guide only. You can find the roll width and roll length you are after on the specific product page.
Roll widths are provided in meters (such as 0.5 x 10mtr) so your wall widths and heights should be inputted in meters also.
If you are purchasing an offset match product then you may need a little extra as there may be some waste. If you have any windows or doors in your walls you can simply ignore these. This will give a good estimate of required roll numbers.

Wallpaper Calculator