01427 616597
Ideal for repairing cracks, drillholes or similar damage to woodchip surfaces.
The Erfurt woodchip filler can be used for the repair of holes in all woodchip structures – including non-woven woodchip.
BEFORE USING
The surface must be dry, evenly absorbent and clean.
APPLICATION
Shake the tube well before use. Apply the filler directly from the tube to the damaged area and if necessary, use a spatula or brush to apply it. The filler is easy to shape, breathable, dries white and crack free. After drying, paint over the repaired surface. Clean tools with water immediately after use.
CONSUMPTION
Depends on the surface.
DRYING
Can be painted over after approximately 1 hour, depending on the thickness of the layer, surface condition and the room temperature.
STORAGE
Store in a cool but frost-free place. Keep the tube tightly closed and out of reach of children.
DISPOSAL
Only empty containers should be recycled. Dried material residues can be disposed of with the residual waste. Uncured material residues can be disposed of in a suitable landfill in compliance with local regulations.
This is a simple wallpaper calculator and should be used as a guide only. You can find the roll width and roll length you are after on the specific product page.Roll widths are provided in meters (such as 0.5 x 10mtr) so your wall widths and heights should be inputted in meters also.If you are purchasing an offset match product then you may need a little extra as there may be some waste. If you have any windows or doors in your walls you can simply ignore these. This will give a good estimate of required roll numbers.
