01427 616597enquiries@erfurtmav.com
A Class 1 Fire rating can be achieved with this product by overlaying with Wallrock Fireliner and using Wallrock Thermal FR (Fire Retardant) Adhesive on both the Insulation Liner and lining paper.
Insulation Liner is 4mm thick polystyrene liner providing quick and easy heatsaving wall insulation on inside walls whilst giving resistance to damp and mould formation on problem walls.
Produces a basic surface that can be over hung with a decorative wallpaper, we recommend covering with a lining paper such as Wallrock Fibreliner Smooth if the Insulation Liner is to be painted to achieve a good finish and to improve the durability of the surface.
You can achieve a Class 1 Fire rateing with this product by overlaying with Wallrock Fireliner and using Wallrock Thermal FR (Fire Retardant) Adhesive on both the Insulation Liner and lining paper
To see the product label, please click here
Important Safety Information Compliance with Building Regulations;This product should not be used in isolation for projects such as new builds and extensions where Building Regulations are applicable. If used as part of a system that both adds to the insulation value and protects the surface from fire it may be compliant but expert advice should be sought. Fire SafetyWhen used in isolation this product is suitable as a localised ‘problem solver’ only for cold external walls and is not recommended for use in fire escape routes or on ceilings.
Fire resistance can be improved significantly by using in conjunction with the Wallrock Fireliner system, cross lining the surface with Wallrock Fireliner and using Wallrock Fireliner FR Adhesive to apply both products. This improves the performance of the system to a BS Class 1 which satisfies Building Regulations in relation to wallpapers used in private residences for rooms up to 30m². PreparationSurfaces painted prior to 1960 may contain lead pigments and special precautions should be taken when preparing such surfaces.
We strongly recommend using our Wallrock Thermal Liner Adhesive or Wallrock Thermal FR Adhesive for application of this product, and can unfortunately not accept responsibility for adhesion problems when an alternative adhesive has been used.
For the perfect finish, overhang with Wallrock Fibreliner ® or other suitable product from the Wallrock family.
Single length: 10m x 0.5cm coverage: 5m² approx
Applying Red Label Insulation Liner (4mm)
AdhesiveWe recommend our Wallrock Thermal Liner Adhesive or Wallrock Thermal FR Adhesive for application of Red Label Insulating Lining Paper or other solvent free adhesives suitable for hanging polystyrene wallcoverings. However, we cannot unfortunately accept responsibility for adhesion problems when an adhesive other than Wallrock Thermal Liner Adhesive or Wallrock Thermal FR Adhesive has been used.
WarningSurfaces painted prior to 1960 may contain lead pigments and special precautions should be taken when preparing these surfaces.
This is a simple wallpaper calculator and should be used as a guide only. You can find the roll width and roll length you are after on the specific product page.Roll widths are provided in meters (such as 0.5 x 10mtr) so your wall widths and heights should be inputted in meters also.If you are purchasing an offset match product then you may need a little extra as there may be some waste. If you have any windows or doors in your walls you can simply ignore these. This will give a good estimate of required roll numbers.