Wallrock Fireliner (Class 0)

Wallrock Fireliner is the ultimate fire resistant lining paper that will also help protect vulnerable surfaces from fire.

Wallrock Fireliner is a 'Class Zero' fire rated liner (tested to BS476) that also contains fire retardant so that fire risk is further limited even when the paper is peeling or has been applied over normally flammable surfaces. Engineered within the product are other class leading Wallrock features, a no nonsense paper - strong, durable and easy to hang.

Can be used on a whole variety of problematic walls and ceilings, adding fire protection to cracked and damaged surfaces, which can be covered quickly and easily, and because of its class leading strength and durability it will also help to reinforce your wall surfaces.

Developed with the best modern materials and technology to enable old and tired walls to be smooth once more.

Watch this video to see for yourself just how effective the Wallrock Fireliner is.

Class 0 rated (Class zero is the ultimate in wallpaper classification for reaction to fire)
Contains active fire retardants
Helps protect vulnerable surfaces in the event of a fire
Contains textile fibres for strength and durability
Reinforces vulnerable and damaged surfaces
Paste the wall or the paper
Allows walls to breathe
Contains no PVC
Use paper from well managed sources
Recommended adhesive - Wallrock Power Adhesive, or for ultimate protection use Wallrock Thermal Liner FR Adhesive.
Available in 2 roll sizes, 55cm x 10m or 55cm x 20m

Fire Certificate for Wallrock Fireliner can be viewed here

Fire Certificate when used over Wallrock Thermal Liner can be viewed here

Fire Certificate when used over Insulating Lining Paper Graphite Plus can be viewed here

Fire Certificate when used over Insulating Lining Paper can be viewed here

Fire Certificate when used over Heatsaver can be viewed here

Wallrock Fireliner label can be viewed here

To see our guide to fire ratings, click here

Features	Helps protect flammable surfaces in the event of fire Very strong, reinforced lining for covering surfaces quickly and easily Paste the wall or the paper Allows walls to breathe Contains no PVC Uses paper from well managed sources Fire rated Class 0 (Class '0' is the ultimate in wallpaper classification for reaction to fire) Recommended adhesive - Wallrock Power Adhesive, or for extra protection, use Wallrock Thermal FR Adhesive. single length: 10m x 55cm coverage: 5.5m² approx double length: 20m x 55cm coverage: 11m² approx
How To Apply	Instructions for Hanging Wallrock Fireliner Cut all lengths required allowing extra for trim at each end, or simply hang directly from the roll onto a pre-pasted wall or ceiling. Apply the inner surface to the wall. Please note Wallrock Fireliner can also be hung horizontally, especially useful if you intend to overhang with a decorative wallpaper. Mark a guideline with a pencil for the first length, using a plumbline as a guide for vertical drops or a spirit level for horizontal application. If applying the adhesive directly to the wall or ceilings, apply enough to hang one or two lengths at a time, ensuring the paste exceeds the width of the second length. If pasting the material (either side) make sure all edges are covered. With both methods, hang Wallrock Fireliner immediately - no soaking is required. Apply the first length along the guideline and smooth out with a wallpaper brush then trim the ends. Butt join all subsequent lengths being careful not to overlap the edges. Allow Wallrock to dry thoroughly before decorating with emulsion paint or overhanging with another wallcovering (normally 24 hours is sufficient). Wallrock Fireliner is also ‘dry strippable’ in many applications. We strongly recommend the use of a good quality ready mixed adhesive, such as our Wallrock Power Adhesive, for application of this product, or for extra protection use Wallrock Thermal Liner FR Adhesive.
Short Desc	ROLL SIZE Single - 10m x 55cm (5.5m² approx) currently unavailable Double - 20m x 55cm (11m² approx) currently unavailable Double - 20m x 100cm (20m² approx) ROLLS/CARTON 16 rolls (55 single) currently unavailable 8 rolls (55 double) currently unavailable 4 rolls (100 double) APPLICATION Paste the wall or the paper FIRE RATING Class Zero RECOMMENDED PASTE Wallrock Thermal FR Adhesive

-->

Helps protect flammable surfaces in the event of fire
Very strong, reinforced lining for covering surfaces quickly and easily
Paste the wall or the paper
Allows walls to breathe
Contains no PVC
Uses paper from well managed sources
Fire rated Class 0 (Class '0' is the ultimate in wallpaper classification for reaction to fire)
Recommended adhesive - Wallrock Power Adhesive, or for extra protection, use Wallrock Thermal FR Adhesive.

single length: 10m x 55cm coverage: 5.5m² approx double length: 20m x 55cm coverage: 11m² approx

Instructions for Hanging Wallrock Fireliner

Cut all lengths required allowing extra for trim at each end, or simply hang directly from the roll onto a pre-pasted wall or ceiling. Apply the inner surface to the wall. Please note Wallrock Fireliner can also be hung horizontally, especially useful if you intend to overhang with a decorative wallpaper.
Mark a guideline with a pencil for the first length, using a plumbline as a guide for vertical drops or a spirit level for horizontal application.
If applying the adhesive directly to the wall or ceilings, apply enough to hang one or two lengths at a time, ensuring the paste exceeds the width of the second length. If pasting the material (either side) make sure all edges are covered. With both methods, hang Wallrock Fireliner immediately - no soaking is required.
Apply the first length along the guideline and smooth out with a wallpaper brush then trim the ends.
Butt join all subsequent lengths being careful not to overlap the edges.
Allow Wallrock to dry thoroughly before decorating with emulsion paint or overhanging with another wallcovering (normally 24 hours is sufficient).

Wallrock Fireliner is also ‘dry strippable’ in many applications.

We strongly recommend the use of a good quality ready mixed adhesive, such as our Wallrock Power Adhesive, for application of this product, or for extra protection use Wallrock Thermal Liner FR Adhesive.