Red Label Lining is manufactured using a blend of top quality fibres from well managed sources. Red Label Lining is an easy to hang, high quality traditional lining paper. Available in grades 800, 1000, 1200, 1400, 1700 and 2000, Red Label Lining produces the perfect base for decorating with other wall coverings, emulsion painting and some paint effects. There is a grade suitable for all decorating applications.
Provides a degree of surface reinforcement, covers small cracks and defects whilst preparing surfaces for paint or decorative wallpaper.
Recommended adhesive: good quality ready mixed. Pattern Repeat: free match.
2000 Grade Lining
Exclusively produced to create a smooth finish on walls and ceilings.
single length: 10m x 56cm coverage: 5.6m² approxdouble length: 20m x 56cm coverage: 11.2m² approx
NB: 2000 are not available as 'Quad' rolls
For 2000 Grade Red Lining Paper
Recomended paste - Good quality ready mixed adhesive.
Paste liberally to each length making sure all edges have been covered. Fold each length paste to paste and soak until pliable - normally 10-12 minutes.Recomended paste - Good quality ready mixed adhesive.
Before application check all rolls are undamaged and you have sufficient wallcovering to complete the job. If any fault is found return the wallcovering and labels to the place of purchase. We are not liable for faulty application. This does not affect your statutory rights. Follow the instructions carefully.
To minimise the hazard in the event of fire, do not apply wallcoverings over expanded polystyrene veneers and ensure the wallcoverings are always firmly stuck down as loose wallcoverings may contribute to the hazard. Surfaces painted prior to 1960 may contain lead pigments and special precautions should be taken when preparing these surfaces.
This is a simple wallpaper calculator and should be used as a guide only. You can find the roll width and roll length you are after on the specific product page.Roll widths are provided in meters (such as 0.5 x 10mtr) so your wall widths and heights should be inputted in meters also.If you are purchasing an offset match product then you may need a little extra as there may be some waste. If you have any windows or doors in your walls you can simply ignore these. This will give a good estimate of required roll numbers.