01427 616597enquiries@erfurtmav.com
A high viscosity adhesive suitable for application of polystyrene products to walls in particular Climapor XPS 6mm Panels. Available in 1kg and 4kg tubs.
Dispersion glue without solvents: For ceiling tiles, panels and insulation wallpaper made of polystyrene.
Apply the glue regularly or punctually with a toothed spatula. Drying time: 5 min. Remove excess glue immediately with some water.
Working temperature: +10° C - +25°C. Storage cool and dry. Consumption: 250 g/m².
This is a simple wallpaper calculator and should be used as a guide only. You can find the roll width and roll length you are after on the specific product page.Roll widths are provided in meters (such as 0.5 x 10mtr) so your wall widths and heights should be inputted in meters also.If you are purchasing an offset match product then you may need a little extra as there may be some waste. If you have any windows or doors in your walls you can simply ignore these. This will give a good estimate of required roll numbers.